user guide kabuto 2W
First time registration :
When you have received your new suitcase, no fingerprint is recorded in the Memory, any finger will open it until you have recorded one. To record the first fingerprint:
• Place one finger on the sensor to Wake up the system,
• Press the button next to the sensor and hold it down for 2 seconds. The LED will lit yellow quickly,
• Place one finger on the sensor for scanning. The LED lits up blue then green when the scan is completed,
• Remove the finger, the LED flashes again.
• You have to scan the same finger 4 times in succession to record a full fingerprint, until the LED changes to solid blue.
Your fingerprint is saved and will be the only one that can open the bag, it is the master fingerprint that allows to register any additional fingerprint.
Further fingerprint registration registration
You can record up to 10 different fingerprints. To record a second fingerprint – and any additional one – you have to activate the system with the master fingerprint.
• Then quickly press the button next to the sensor and hold it for 2 seconds, until the green LED flashes rapidly.
• Repeat the registration steps as explained above for the first registration
You can record more fingerprints by first opening the lock with any registered finger first, then follow the above procedure.
Only on the smart carry-on XT 2W model
Should the lock remain dead when you touch it - no light, no sound - you may follow this step:
• Use a USB C cable that you plug into a USB charger. It is important to use a charger plugged in the main, not a battery. This should reactivate the lock.
•Let it charge for 30’ before unplugging.
Only for kabuto 2W 2020
The fingerprint recognition circuit is powered by 2 x LR0003 AAA batteries that should be replaced every 18 months. The LED near the scanner will blink slowly in red when the batteries are nearly worn.
To access the batteries holder which is located inside the suitcase right under the carry handle, lay flat your suitcase and unzip the fabric. The zipper is hidden alongside of the the suitcase. Slide the cover of the batteries holder and replace with 2 x Alkaline AAA batteries.
We recommend that you purchase long-life alkaline battery to extend the period of use.
Should the batteries go completely dead while you suitcase is locked, you can power the lock from outside by plugging a USB C cable into the USB C socket located in the carry handle, opposite side of the scanner.
Your Kabuto comes with a set of spare keys, remember to keep one with you (in your wallet for example) while on the move.
Expanding your suitcase
Simply undo the zipper that goes around the lower section of the suitcase; Pull the telescopic handle to its maximum.
Expand your Kabuto by holding the telescopic handle with one hand, then with the other hand pull the top handle.
You’ve just made your suitcase 50% bigger !
The TSA lock of the Kabuto Lite model
The Kabuto Lite does not come with the auto lock with a fingerprint, but with a TSA approved 3-digit lock.
To set your own code, follow these steps :
1 - Put the dials at its original numbers 0-0-0. To open the lock, move upward the B button
2 - With a pencil or something pointed, press firmly on the A button next to the 3 dials. Keep it pressed down.
3 - With your other hand, turn the dials to the desired setting.
4- Then, release the button A .
Now you have finished to set your personal combination. Please remember your personal combination by heart.
5 - Please repeat the above steps to reset the numbers.
Devices and bottom compartment
The Kabuto case offers two compartments to store your computer:
A large front pocket for a 15 inches computer.
Kabuto Smart Carry-on XT 2 Wheels 2020 : Connected back pocket with USB A for 13' laptop
Kabuto Smart Carry on XT 2 Wheels : Connected back pocket whit USB A for 12' laptop
Delivered only with the 2 SMART wheels except the black copper one
The combination is 0-0-0 and can be customized by following these steps:
1 - Pull the padlock rod - picture 1-
2 - Rotate the shank 90 ° counterclockwise until you can press the shank down.
Turn the knobs to obtain the desired combination.
3 - Release the rod to record this combination. You can change this combination by repeating the steps above.
Size of the shoe compartment of all model : 13.5 cm (5.3 inches) high, 21 cm (8.2 inches) deep, 33 cm (13 inches) wide
Hook and luggage cover
Delivered only with the 2 wheels
The case is fully waterproof and ultra shock resistant but also comes with a protective cover (also expandable) that protects the bag from the weather or when you have to put it in the hold.
You have just bought a Kabuto luggage? Click here to activate your warranty.
If you bought your Kabuto on our eshop, the warranty is automatically registered with your online order, no action is required.
Vous n'avez pas encore d'articles dans votre panier. Rendez-vous dans notre e-shop pour la sélection des produits